International Journal of Advanced Technology and Engineering Exploration ISSN (Print): 2394-5443    ISSN (Online): 2394-7454 Volume-12 Issue-123 February-2025
  1. 4774
    Citations
  2. 2.8
    CiteScore
Optimizing integrated circuit testing: a comprehensive approach to testability and efficiency

Praveen K1, Rajanna G S1 and Shivakumara Swamy G M2

Srinivas University,Mukka, Surathkal, Mangaluru-574146, Karnataka,India1
Bapuji Institute of Engineering and Technology,Shamnur Road, Davangere-577004, Karnataka,India2
Corresponding Author : Praveen K

Recieved : 07-August-2023; Revised : 26-January-2025; Accepted : 11-February-2025

Abstract

Testing is a critical aspect of integrated circuit (IC) design, aimed at ensuring thorough evaluation of all nodes within the designs netlist to identify potential defects. The effectiveness of design for testability (DFT) relies on assessing the observability and controllability of each node within the architecture. These attributes form the foundation of DFT, enabling optimal test coverage (TC) with minimal test time (TT). The rigor of design testing is directly linked to the number of patterns used, with crucial parameters, such as multi-voltage conditions, temperature variations, and comprehensive testing methodologies playing key roles during the process. This methodology integrates techniques, such as scan insertion (SI), automatic test pattern generation (ATPG), embedded deterministic testing, and pattern simulation. The primary goal is to compress and minimize test data volume (TDV) and TT. ATPG plays a pivotal role in this approach by generating patterns tailored to meet compression requirements. Simulation validates the effectiveness of these patterns in reducing TT. The application of this methodology leads to significant improvements in testing efficiency. This study effectively determines the optimal multi-voltage and temperature parameters for IC testing. By leveraging automatic pattern generation and compression techniques, it achieves a substantial reduction in both test data and TT. The findings emphasize the importance of adhering to the DFT principles of observability and controllability to maximize TC. The proposed methodology demonstrates clear improvements in TDV and TT efficiency, contributing not only to the field of IC manufacturing but also emphasizing the value of a systematic and comprehensive approach to DFT in enhancing the reliability and performance of ICs.

Keywords

Design for testability (DFT), Test coverage (TC), Test time (TT), Test data volume (TDV), Automatic test pattern generation (ATPG), Observability and controllability.

Cite this article

K P, GS Rajanna, G M SS. Optimizing integrated circuit testing: a comprehensive approach to testability and efficiency. International Journal of Advanced Technology and Engineering Exploration. 2025;12(123):317-338. DOI : 10.19101/IJATEE.2023.10102083

References
[1]
Mojtabavi NM, Ooi CY. A novel scan architecture for low power scan‐based testing. VLSI Design. 2015; 2015(1):1-13.
[Crossref] [Google Scholar]
[2]
Trivedi R, Dhariwal S, Kumar A. Comparison of various ATPG techniques to determine optimal BIST. In international conference on intelligent circuits and systems 2018 (pp. 93-8). IEEE.
[Crossref] [Google Scholar]
[3]
Borda P, Prajapati P. LOC, lOS and LOES at-speed testing methodologies for automatic test pattern generation using transition delay fault model. International Journal of Research in Engineering and Technology. 2014; 3(3):273-7.
[Google Scholar]
[4]
Shantagiri PV, Kapur R. Aggressive exclusion of scan flip-flops from compression architecture for better coverage and reduced TDV: a hybrid approach. Journal of Low Power Electronics and Applications. 2019; 9(2):1-25.
[Crossref] [Google Scholar]
[5]
Patel P, Rajawat A, Jain P. Comparative analysis of simulation techniques: scan compression and internal scan. International Journal on Cybernetics & Informatics. 2023; 12:15-22.
[Crossref] [Google Scholar]
[6]
Xiang D. Test compression for launch-on-capture transition fault testing. ACM Transactions on Design Automation of Electronic Systems. 2023; 29(1):1-20.
[Crossref] [Google Scholar]
[7]
Shukla NK, Mayet AM, Raja MR, Parayangat M, Usman M, Verma R, et al. A unified test data volume compression scheme for circular scan architecture using hosted cuckoo optimization. The Journal of Supercomputing. 2024; 80(5):6411-34.
[Crossref] [Google Scholar]
[8]
Pandey K. A critical engineering dissection of LOS and LOC at-speed test approaches. In IEEE international test conference India 2020 (pp. 1-7). IEEE.
[Crossref] [Google Scholar]
[9]
Murugan SK, Prabha MM. Launch off shift and capture power reduction in transition fault test based on design for testability methods. International Journal of Research in Computer Applications and Robotics, India. 2015; 3(2):40-9.
[Google Scholar]
[10]
Thobhani P, Mehta U. Development of ATPG using basic algorithm processes. International Engineering Journal for Research & Development. 2021; 6:1-8.
[11]
Yang KC, Lee MT, Wu CH, Li JC. ATPG and test compression for probabilistic circuits. In international symposium on VLSI design, automation and test (VLSI-DAT) 2019 (pp. 1-4). IEEE.
[Crossref] [Google Scholar]
[12]
Chandrashekar C, Neelgar BI. Pattern generation techniques for BIST. International Journal of Research and Analytical Reviews. 2020; 7(3):355-9.
[Google Scholar]
[13]
Das KS, Zala A. Optimizing cell-aware ATPG pattern volume to keep test cost competitive. In international conference on electronics, computing and communication technologies 2020 (pp. 1-6). IEEE.
[Crossref] [Google Scholar]
[14]
Singh VK, Sarkar T, Pradhan SN. Power-aware testing for maximum fault coverage in analog and digital circuits simultaneously. IETE Technical Review. 2022; 39(6):1395-409.
[Crossref] [Google Scholar]
[15]
Kumar YG, Kariyappa BS, Kurian MZ. Design, implementation and performance analysis of test pattern generator for built-in self-test using m-GDI technology. Indian Journal of Science and Technology. 2022; 15(5):221-6.
[Crossref] [Google Scholar]
[16]
Liang ZJ, Wu YT, Yang YF, Li JC, Chang N, Kumar A, et al. High-speed, low-storage power and thermal predictions for ATPG test patterns. In international test conference 2023 (pp. 206-15). IEEE.
[Crossref] [Google Scholar]
[17]
Ramasamy J, Samiappan D. Design and Analysis of Non-vulnerable PRBS Generation with Internal Shift and XOR of LFSR. In international conference on electrical and electronics engineering 2023 (pp. 573-582). Singapore: Springer Nature Singapore.
[Crossref] [Google Scholar]
[18]
Ye CS, Zheng SX, Tsai FJ, Wang C, Lee KJ, Cheng WT, et al. Efficient test compression configuration selection. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems. 2021; 41(7):2323-36.
[Crossref] [Google Scholar]
[19]
Tsai FJ, Ye CS, Lee KJ, Zheng SX, Huang Y, Cheng WT, et al. Prediction of test pattern count and test data volume for scan architectures under different input channel configurations. In international test conference 2020 (pp. 1-10). IEEE.
[Crossref] [Google Scholar]
[20]
Wang F, Gupta SK. An effective and efficient automatic test pattern generation (ATPG) paradigm for certifying performance of RSFQ circuits. IEEE Transactions on Applied Superconductivity. 2020; 30(5):1-11.
[Crossref] [Google Scholar]
[21]
Wang F, Gupta S. Automatic test pattern generation for timing verification and delay testing of RSFQ circuits. In 37th VLSI test symposium 2019 (pp. 1-6). IEEE.
[Crossref] [Google Scholar]
[22]
Kung YC, Lee KJ, Reddy SM. Generating single-and double-pattern tests for multiple CMOS fault models in one ATPG run. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems. 2019; 39(6):1340-5.
[Crossref] [Google Scholar]
[23]
Chen KH, Chen CY, Huang JL. Testability measures considering circuit reconvergence to reduce ATPG runtime. In 22nd international symposium on design and diagnostics of electronic circuits & systems 2019 (pp. 1-12). IEEE.
[Crossref] [Google Scholar]
[24]
Nekar H, Siddamal SV. Design and implementation of novel scan architecture for test power reduction. Procedia Computer Science. 2020; 171:2556-62.
[Crossref] [Google Scholar]
[25]
Suteddy W, Adiwilaga A, Atmanto DA. Fault coverage testing on the ISCAS’89 S1423 sequential circuit using scan based design and synopsis tetramax. Journal of Computer Engineering, Electronics and Information Technology. 2022; 1(2):103-16.
[Crossref] [Google Scholar]
[26]
Kongala S, Gupta A, Walia Y, Jain S. Novel methodology to optimize TAT and resource utilization for ATPG simulations for large SoCs. In international test conference 2023 (pp. 60-4). IEEE.
[Crossref] [Google Scholar]
[27]
Mohan M, Shrimali T. Hybrid data approach for selecting effective test cases during the regression testing. International Journal on Smart Sensing and Intelligent Systems. 2017; 10(5):1-24.
[Crossref] [Google Scholar]
[28]
Dannina SSR, Kumar S. Efficient GDI RAM design and low power clock splitting based ATPG for BIST. International Journal of Advanced Science and Technology. 2019; 28(19):1152-63.
[29]
Zhang G, Yuan Y, Liang F, Wei S, Yang CF. Low cost test pattern generation in scan-based BIST schemes. Electronics. 2019; 8(3):1-11.
[Crossref] [Google Scholar]
[30]
Srivastava A, Abraham J. Low capture power at-speed test with local hot spot analysis to reduce over-test. In international test conference 2022 (pp. 446-55). IEEE.
[Crossref] [Google Scholar]
[31]
Ni T, Wen X, Amrouch H, Zhuo C, Song P. Introduction to the special issue on design for testability and reliability of security-aware hardware. ACM Transactions on Design Automation of Electronic Systems. 2023; 29(1):1-3.
[Crossref] [Google Scholar]
[32]
Pomeranz I. Path unselection for path delay fault test generation. IEEE Transactions on Very Large Scale Integration (VLSI) Systems. 2022; 31(2):267-75.
[Crossref] [Google Scholar]
[33]
Li M, Lin Y, Gupta S. Design for testability (DFT) for RSFQ circuits. In 41st VLSI test symposium 2023 (pp. 1-7). IEEE.
[Crossref] [Google Scholar]
[34]
Chauhan J, Panchal C, Suthar H. Scan methodology and ATPG DFT techniques at lower technology node. In international conference on computing methodologies and communication 2017 (pp. 508-14). IEEE.
[Crossref] [Google Scholar]
[35]
Gopikrishna K, Jindal P. Test coverage analysis of DFT with EDT and without EDT architecture. In 12th international conference on computing communication and networking technologies 2021 (pp. 1-4). IEEE.
[Crossref] [Google Scholar]
[36]
Cai S, Zhou Y, Liu P, Yu F, Wang W. A novel test data compression approach based on bit reversion. IEICE Electronics Express. 2017; 14(13):1-11.
[Crossref] [Google Scholar]
[37]
Roy S, Stiene B, Millican SK, Agrawal VD. Improved pseudo-random fault coverage through inversions: a study on test point architectures. Journal of Electronic Testing. 2020; 36:123-33.
[Crossref] [Google Scholar]
[38]
Javvaji PK, Tragoudas S. Test pattern generation and critical path selection in the presence of statistical delays. IEEE Transactions on Very Large Scale Integration (VLSI) Systems. 2019; 28(1):163-73.
[Crossref] [Google Scholar]
[39]
Kundu S, Abraham J. Revisiting test compression configuration in context of multi-core testing using packetized scan network. In 37th international conference on VLSI design and 23rd international conference on embedded systems (VLSID) 2024 (pp. 724-9). IEEE.
[Crossref] [Google Scholar]
[40]
Talatule SD, Zode P, Zode P. A secure architecture for the design for testability structures. In 19th international symposium on VLSI design and test 2015 (pp. 1-6). IEEE.
[Crossref] [Google Scholar]
[41]
Iwata H, Maeda Y, Matsushima J, Laouamri O, Khanna N, Mayer J, et al. A new framework for RTL test points insertion facilitating a “Shift-Left DFT” strategy. In international test conference 2023 (pp. 1-10). IEEE.
[Crossref] [Google Scholar]
[42]
Chao Z, Zhang X, Huang J, Ye J, Cai S, Li H, et al. A fast test compaction method for commercial DFT flow using dedicated pure-MaxSAT solver. In 29th Asia and South Pacific design automation conference 2024 (pp. 503-8). IEEE.
[Crossref] [Google Scholar]
[43]
Ahmed N, Tehranipoor M, Ravikumar CP. Enhanced launch-off-capture transition fault testing. In international conference on test 2005. IEEE.
[Crossref] [Google Scholar]
[44]
Ansari R, Aghdasi P, Shahnazari A. DFT-based finite element analysis of compressive response in armchair phosphorene nanotubes. Journal of Molecular Graphics and Modelling. 2024; 129:108751.
[Crossref] [Google Scholar]
[45]
Pomeranz I. Sharing of topped-off compressed test sets among logic blocks. IEEE Access. 2024; 12:49895-903.
[Crossref] [Google Scholar]