Synergistic effects of vermiculite, pumice stone, and micro-silica on the mechanical and microstructural performance of lightweight concrete
Ananthakumar Ayyadurai1, Saravanan M M1 and Dineshkumar G2
Associate Professor, Department of Civil Engineering,Vivekanandha College of Engineering for Women, Tiruchengode - 637 205,Tamil Nadu,India1
Associate Professor, Department of Civil Engineering,Vaagdevi College of Engineering, Warangal - 506005,Telangana,India2
Associate Professor, Department of Civil Engineering,Vaagdevi College of Engineering, Warangal - 506005,Telangana,India2
Corresponding Author : Ananthakumar Ayyadurai
Recieved : 27-May-2025; Revised : 22-June-2026; Accepted : 25-June-2026
Abstract
Lightweight concrete (LWC) is widely used in construction due to its lower density, improved thermal insulation, and enhanced fire resistance. This study investigates the utilization of vermiculite and pumice stone as fine and coarse aggregate replacements, respectively, in LWC, together with micro-silica incorporated at 5%, 10%, 15%, and 20% by weight of cement and a superplasticizer dosage of 0.3%. A comprehensive experimental program comprising 32 mix proportions, each tested in triplicate, was conducted to evaluate the influence of these materials on the microstructural and mechanical performance of LWC. The novelty of this study lies in its detailed investigation of the synergistic effects of vermiculite, pumice stone, and micro-silica on key performance parameters, including density, void ratio, water absorption, and mechanical strength. Among all mixtures, mix number 31 (MN31), containing micro-silica, exhibited the best overall performance, achieving the highest compressive strength (CS) of 17.65 N/mm², satisfying the requirements of ASTM C330 for LWC. The MN31 mix also attained a density of 1438.48 kg/m³, a flexural strength (FS) of 2.84 N/mm², and a split tensile strength (STS) of 1.63 N/mm². Furthermore, microstructural characterization using field-emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDS) revealed improved matrix integrity and refined pore structure, which contributed to the enhanced mechanical performance of the developed LWC.
Keywords
Lightweight concrete, Vermiculite, Pumice stone, Micro-silica; Mechanical properties, Microstructural characterization.
Cite this article
Ayyadurai A, MM Saravanan, G D. Synergistic effects of vermiculite, pumice stone, and micro-silica on the mechanical and microstructural performance of lightweight concrete. International Journal of Advanced Technology and Engineering Exploration. 2026;13(139):866-885. DOI : 10.19101/IJATEE.2025.121220714
References
[1]
Din WN, Endut A, Lananan F, Kasan NA. Performance evaluation of gravel and clay pebbles growth beds in aquaponics for okra (abelmoscus esculentus) and catfish (clarias gariepinus) growth and production. Environment and Ecology Research. 2024; 12(2):140-53.
[2]
Behera D, Liu KY, Rachman F, Worku AM. Innovations and applications in lightweight concrete: review of current practices and future directions. Buildings. 2025; 15(12):1-46.
[3]
Özer E, Tansel B. Evolution of materials and engineering techniques used in stormwater infrastructure with urban growth and societal changes. Journal of Sustainable Water in the Built Environment. 2026; 12(2):03125001.
[4]
Pothnis JR, Vélon K, Bhatia GS, Hejjaji A, Comer AJ. Investigating the effect of cure schedules and cure initiators on sustainable composites for large offshore structures. Composite Structures. 2024; 327:1-11.
[5]
Liao Q, Zhao XD, Wu WW, Lu JX, Yu KQ, Poon CS. A review on the mechanical performance and durability of fiber reinforced lightweight concrete. Journal of Building Engineering. 2024; 88:109121.
[6]
Pujianto AA, Prayuda H, Asani F, Basuki SM, Wirawan F. Influence of expanded clay aggregate on the engineering properties of lightweight concrete. Ingeniería e Investigación. 2024; 44(1):1-12.
[7]
El GS, Al-jardani Y, Meddah MS, Abu SK, Al-saidy A. mechanical and thermal properties of lightweight concrete with recycled expanded polystyrene beads. European Journal of Environmental and Civil Engineering. 2024; 28(1).
[8]
Abid M, Waqar GQ, Mao J, Javed MF, Almujibah H. Mechanical properties, microstructure and GEP-based modeling of basalt fiber reinforced lightweight high-strength concrete containing SCMs. Journal of Building Engineering. 2024; 96:110378.
[9]
Zhang T, Wang H, Zheng X, Gao S. Axial compressive behaviours of coal gangue concrete-filled circular steel tubular stub columns after chloride salt corrosion. Materials. 2024; 17(11):1-20.
[10]
Islam MM, Siddique AF, Hasan MA, Hossain MM. Mechanical properties of twisted galvanized iron fiber reinforced concrete with different contents and pitches. Construction and Building Materials. 2024; 414:134940.
[11]
Ismadi, Juwono AL, Munawar SS. Investigation of fiber content on physical-mechanical properties of mercerized sisal (Agave Sisalana) fiber-polyester composites. In AIP conference proceedings 2024. AIP Publishing LLC.
[12]
Narattha C, Wattanasiriwech S, Wattanasiriwech D. Sustainable, multifunctional fly ash geopolymer composite with rice husk aggregates for improved acoustic, hygric, and thermal performance. Construction and Building Materials. 2024; 445:137743.
[13]
Saca N, Radu L, Stoleriu S, Dobre D, Calotă R, Truşcă R. Investigation of physical-mechanical properties and microstructure of mortars with perlite and thermal-treated materials. Materials. 2024; 17(14):1-17.
[14]
Liu X, Liang C, Zhang Z, Zhang Y, Xu J, Ma Z. Mechanical performance of low-carbon ultra-high performance engineered cementitious composites (UHP-ECC) with high-volume recycled concrete powder. Journal of Building Engineering. 2024; 88:109153.
[15]
Hamada HM, Al-attar A, Abed F, Beddu S, Humada AM, Majdi A, et al. Enhancing sustainability in concrete construction: a comprehensive review of plastic waste as an aggregate material. Sustainable Materials and Technologies. 2024; 40:e00877.
[16]
Li L, Jiang H, Xiao G, Zhang W, Zou W, Zhang Z, et al. Scalable fabrication of vermiculite nanosheets for high-performance thermal insulation film via multi-hierarchical assembly with poly-m-phenyleneisophthalamide. Applied Surface Science. 2026; 725:165873.
[17]
Aziz AA, Al MIF. An experimental investigation of the mechanical properties of lightweight concrete with pumice aggregate and polypropylene fibers. Engineering, Technology & Applied Science Research. 2025; 15(5):26344-50.
[18]
Moolchandani K. Advancements in pumice-based concrete: a comprehensive review. Next Materials. 2025; 8:1-13.
[19]
Almusawi AM, Shabbar R, Qasim TA. The physical, mechanical and thermal properties of lightweight cement mortar containing grated expanded polystyrene waste. International Journal of Masonry Research and Innovation. 2024; 9(3):240-51.
[20]
Mehedi MT, Sobuz MH, Hasan NM, Jabin JA, Nijum NJ, Miah MJ. High-strength fiber reinforced concrete production with incorporating volcanic pumice powder and steel fiber: sustainability, strength and machine learning technique. Asian Journal of Civil Engineering. 2024; 25(8):6171-87.
[21]
Chu H, Song X, Wang F, Jiang J. Sustainable solidification and resource recovery: utilizing municipal solid waste incineration fly ash in ecological mortar with reduced carbon footprint. Sustainable Chemistry and Pharmacy. 2025; 48:102240.
[22]
Gobetti A, Cornacchia G, Tomasoni G, Ramorino G. The environmental benefits of industrial symbiosis: a case study on substituting sand with steel slag as filler in epoxy mortar. Waste Management & Research. 2025; 43(12):2075-91.
[23]
Ahmed A, Khan MA, Vidak VM, Imtiaz M, Shabir A, Ali T, et al. Self-healing concrete: investigating the synergistic effects of bacillus subtilis and silica fume. European Journal of Environmental and Civil Engineering. 2026; 30(1):2620468.
[24]
Enemuo M, Taleghani AD, Enemuo N, Ogunmodimu O. Integrating copper slag into thermally active building foundations: a pathway to sustainable underground energy storage systems. International Journal of Energy Research. 2026; 2026(1):5370108.
[25]
Ganapathy GP, Kaliyappan SP, Ramamoorthy VL, Shanmugam S, Alobaid A, Warad I, et al. Low alkaline vegetation concrete with silica fume and nano-fly ash composites to improve the planting properties and soil ecology. Nanotechnology Reviews. 2024; 13(1):1-17.
[26]
Reddy U, P S, Reddy CV, Lakhanpal S, Tyagi LK, Muhsen M, et al. Use of silica fume as a replacement of cement in the concrete. In E3S web of conferences 2024 (pp. 1-11). EDP Sciences.
[27]
Al-jabali HM, Edris WF, Khairy S, Mohamed GN, Elsayed HA, El-latief AA. Impact of PEG400–zeolite performance as a material for enhancing strength of the mechanical properties of LECA/foamed lightweight concrete. Infrastructures. 2024; 9(9):1-17.
[28]
Rasendriya S, Effendi R, Setiawan R, Purnama IA. The use of expanded polystyrene (EPS) waste on the compressive strength of concrete using fiber reinforced polymer (FRP). International Journal of Research in Vocational Studies (IJRVOCAS). 2026; 5(4):69-74.
[29]
Maganty ST, VL SK. Design development of lightweight ambient-cured geopolymer sandwich slab panels. Construction and Building Materials. 2026; 508:145095.
[30]
Ramezani AM, Khajehdezfuly A, Poorveis D. Structural lightweight concrete containing basalt stone powder. Buildings. 2024; 14(7):1-20.
[31]
Khan MA, Channa IA, Hanif S, Nawaz M, Wahab A. Mechanical and physical performance of lightweight concrete using waste pumice as coarse aggregate. Spectrum of Engineering Sciences. 2026; 4(2):12-26.
[32]
Sukumar A, Ganesan AK. Analyzing the mechanical and material characteristics of cellular lightweight foam concrete and optimizing design mix through linear regression analysis. Matéria (Rio De Janeiro). 2024; 29(3):1-14.
[33]
Chatterjee A, Yadav A, Sen S, Ghosh S, Choudhary N, Dey N, et al. Polymer-modified nonwovens: functional surfaces for separation, sensing, biomedical and smart textile applications. Journal of Materials Chemistry A. 2026; 14:3210-52.
[34]
Dhar MC, Shakil SR, Hossain MA, Shabur MA, Nila UH, Mottalib MA. Innovative use of tannery solid waste and jute fiber in sustainable leather composites for footwear in Bangladesh. Journal of Material Cycles and Waste Management. 2026; 28:1339-57.
[35]
Abbas ML, Güneyisi E. Compressive behavior and code based evaluation of normal weight and lightweight concrete filled composite steel tubes. Parameters. 2025; 4:17-21.
[36]
Singh B, Singh SB, Barai SV, Ojha PN, Kumar R. Mechanical properties and fracture behavior of concrete made with sintered fly ash lightweight coarse aggregate and electric arc furnace slag as fine aggregate. Research on Engineering Structures and Materials. 2024:1-22.
[37]
ACI Committee 318. Building code requirements for structural concrete (ACI 318-08) and commentary. American Concrete Institute. 2008
[38]
Naidu GD, Gaddam MK, Maganti TR, Anurag A, Chowdary L. Energy-efficient ternary blended alkali-activated hybrid fiber reinforced concrete with recycled aggregates and phase change materials. Journal of Building Pathology and Rehabilitation. 2026; 11(1):25
[39]
China S. Chinese standard classification of occupations. 2015.
[40]
Du BCE, De LPFI. CEB-FIP model code 2010. CEB-FIP: Lausanne, Switzerland. 2012.
[41]
Standard I. Plain and reinforced concrete-code of practice. New Delhi: Bureau of Indian Standards. 2000.
[42]
Gokulkannan N, Manju R, Sasikumar P. Enhancing the mechanical properties of fibre reinforced concrete using diatomaceous earth powder: fresh and hardened properties of concrete. Revista De La Construcción. 2024; 23(3):457-79.
[43]
Maruthai SM, Ayyadurai A, Muthu D, Palanisami S. Optimizing concrete performance through metakaolin and flyash incorporation: a critical appraisal of regression modeling and design code applicability. Matéria (Rio De Janeiro). 2024; 29(3):1-22.
[44]
Saraswathi SG, Rajamani M, Palanisamy S. Prediction of the mechanical properties of hybrid fibre-reinforced polymer concrete using linear regression analysis. Matéria (Rio De Janeiro). 2024; 29(4):1-15.